Missouri Well Data › Ste. Genevieve County › Bloomsdale (63627)
Bloomsdale, MO (63627): well depth, water level & drilling cost
✓ 656 MoDNR records · Ste. Genevieve County
Pull every recorded well near a Bloomsdale (63627) address — $49
How deep are wells in and around Bloomsdale (63627), Missouri?
The median drilled well depth in and around Bloomsdale (63627) is 328 ft, based on 652 wells with recorded depths in the state MoDNR database. Half fall between 237 ft and 435 ft; 90% are shallower than 515 ft.
How much does it cost to drill a well in and around Bloomsdale (63627)?
Applying published per-foot rates to the local median depth of 328 ft: drilling and casing alone typically runs $8,200–$21,320; a complete system including pump, pressure tank, and hookup typically runs $19,680–$32,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Bloomsdale (63627)?
The median static water level is 121 ft below ground surface (middle half of wells: 63 ft–186 ft), from 560 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Ste. Genevieve County.
Part of Ste. Genevieve County well records.
Method: medians computed from MoDNR records (MoDNR certified water wells; depths 0-5,000 ft, with the file's 99999.9 and 88888 sentinel values excluded rather than clamped), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.